The TX100 pH/mV transmitter is a loop-powered 4-20mA transmitter with a wide range of useful features
and programmable options. Five buffer choices are available in two-point calibration mode. The 4-20mA output is scaleable in pH or mV units and has 500V input to output isolation. Temperature is always displayed and is selectable in degrees C or deg F. All stored parameters and calibration data are retained in the non-volatile memory during transmitter power down or power loss. A useful probe clean reminder icon flashes when it is time to clean the probe. Probe cleaning interval is user programmable from 1 to 250 days. The TX100 can be used for wall mounting, panel mounting, pipe mounting and DIN-rail mounting. Cable grips for inlet/outlet to box are included as well as all mounting hardware. The case meets NEMA and IP ratings for water resistance.
- Voltage isolated (500 V) 4-20mA Output
- Non-volatile memory retains all stored configurations and calibration dat
- Output Current Indicator for Out-of-Range and Hold
- Conditions prevents discrepant readings
- Large segmented display indicates pH or mV and
- Temperature simultaneously
- Flashing screen icons indicate mode of operation
- Programmable Probe Clean reminder flashes when it is
- time to clean probe (programmable from 1 to 250 days)
Specifications:
1) Measuring Range (pH)
0.00 to 14.00pH, 0.01 pH resolution, +/- 0.01 accuracy
2) Measuring Range (ORP/mV)
-1999mV to 1999mV, 1mV resolution, +/- 2mV accuracy
3) Temperature Range
-20 deg C to 110 deg C / -4 deg F to 230 deg F, 0.1 deg C/F resolution
4) Current Output Range
2.00mA to 24mA , .01mA resolution, +/-0.005mA accuracy, 500V input/output isolation
5) Enclosure
NEMA 4X IP65, ABS case with pushbutton control pad
HWD: 3.9” (99.1 mm) x 3.9” (99.1 mm) x 2.9” (74.7mm)
6) Weight
approx. 1lb (.45kg)
7) Mounting Options
Wall , panel, din rail and pipe
8) Conduit Openings
2 each 3/8" NPT openings (cordgripsincluded)
9) Ambient Temperature
Transmitter Service, 0 deg C to 60 deg C/ 32 deg F to 140 deg F
10) Ambient Humidity
0 to 95%, non-condensing
11) Location
Designed for non-hazardous areas
12) Temperature Input
2-wire Pt1000 RTD with automatic compensation
13) Max Sensor-to-Transmitter Distance
30 feet (9.1 meters)
14) Power Requirement
12-24 VDC, max 600Ohm load
Documentation:
